Epoxy & polyaspartic garage floor coatings in Austin, TX
Austin garages run the gamut — 1970s slabs in Allandale, post-tension slabs in the newer far-north subdivisions. We moisture-test every floor before a drop of epoxy goes down.
What a coated floor costs in Austin
Our pricing does not change by suburb — Austin homeowners pay the same published per-square-foot rate as everyone else in Greater Austin. Here is what the three systems come to on the garage sizes we see most often out here.
| Garage | Base Flake1/4" & 1/8" Blended Flake | Advanced Flake1/16" Blended Flake | Metallic / CustomLava Flow® metallic epoxy |
|---|---|---|---|
| 2 car(460 sq ft) | $2,760 | $3,680 | from $4,600 |
| 2.5 car(570 sq ft) | $3,420 | $4,560 | from $5,700 |
| 3 car(690 sq ft) | $4,140 | $5,520 | from $6,900 |
Why Austin floors need a real topcoat
Central Texas is hard on garage floors in three specific ways: slabs that still hold moisture, afternoon sun through an open door, and tires that come home at 140°F in August. A hardware-store epoxy kit fails on all three. Our system answers each one — an epoxy base rated to 8 lbs of moisture vapor emission, a UV-stable polyaspartic topcoat that will not amber, and a cured film that hot tires cannot lift.
Every Austin job includes diamond grinding, up to 13 linear feet of crack and joint repair, a full flake broadcast to rejection, and the scrape-and-sand pass that makes the surface smooth underfoot — every step, every time.
Finishes we install around Austin
Tuxedo
1/4" Blended Flake
Leander · 2-car · 460 sq ft
Saddle Tan
1/4" Blended Flake
Cedar Park · 2.5-car · 570 sq ft
Cappuccino
1/8" Blended Flake
Georgetown · 2-car · 460 sq ft
Granite
1/16" Blended Flake
Round Rock · 3-car · 690 sq ft
FAQ
Austin questions
Still unsure about something? Call and ask — you will get the person who runs the crew, not a call center.
How much does an epoxy garage floor cost in Austin, TX?
Same published pricing as the rest of Greater Austin: $6 per square foot for Base Flake (1/4" or 1/8" Versatile® Blended Flake), $8 for Advanced Flake (the fine 1/16" chip) and from $10 for Lava Flow® Metallic. A standard two-car Austin garage of about 460 square feet runs $2,760 to $3,680 installed, including prep and up to 13 linear feet of crack repair.
Do you charge a travel fee to Austin?
No. Austin is inside our standard service radius — the price you get from the online estimator is the price, wherever you are in Travis County.
How soon can you start in Austin?
Most Austin jobs are scheduled within one to two weeks. Call 512-858-8517 and we will tell you the next open crew day before you commit to anything.
How long does the install take?
It depends on the size of the floor and the condition of the slab — grinding off a failed coating adds time. We give you the schedule when we book, and your crew tells you the exact window for foot traffic and for parking before they leave.
Ready for a finished floor in Austin?
Six questions, about 60 seconds, and a real itemized number — no sales visit required.